Carboxymethylcellulose/Hydrotalcite Bionanocomposites as Paraben Sorbents.

In this work, we synthesized several bionanocomposites of hydrotalcites containing carboxymethylcellulose as interlayer anion (HT-CMC) to be used as sorbents for parabens, a family of emergent pollutants (specifically, for 4-methyl-, 4-propyl- and 4-benzylparaben). Bionanocomposites were obtained by ultrasound-assisted coprecipitation and characterized by X-ray diffraction analysis, fourier transform infrared and raman spectroscopies, elemental and thermogravimetric analysis, scanning and transmission electron microscopies and X-ray fluorescence. All materials proved to be efficient sorbents for parabens through a process conforming to a pseudo second-order kinetics. The experimental adsorption data fitted the Freundlich model very closely and were also highly correlated with the Temkin model. The effects of pH, adsorbate concentration, amount of sorbent and temperature on the adsorption process was evaluated, obtaining the best results for methylparaben adsorption at pH 7, 25 mg of adsorbent and 348 K. The sorbent, HT-CMC-3, showed the highest adsorption capacity (>70%) for methylparaben. Furthermore, a reusability study showed that the bionanocomposite is reusable after its regeneration with methanol. The sorbent still retained its adsorption capacity for up to 5 times with a little loss of efficiency (<5%).

Insights into the Reaction Mechanisms of Nongraphitic High-Surface Porous Carbons for Application in Na- and Mg-Ion Batteries.

The fabrication of low-cost carbon materials and high-performance sodium- and magnesium-ion batteries comprising hierarchical porous electrodes and superior electrolytes is necessary for complementing Li-ion energy storage. In this work, nongraphitic high-surface porous carbons (NGHSPCs) exhibited an unprecedented formation of n-stages (stage-1 and stage-2) due to the co-intercalation of sodium (Na(dgm)2C20) with diglyme. X-ray diffraction patterns, Patterson diagram, Raman spectra, and IR spectra suggested the presence of n-stages. This phenomenon implies an increase of the initial capacity (∼200 mAh g-1) and good Na-ion diffusion (2.97 × 10-13 cm2 s-1), employing diglyme as compared to standard electrolytes containing propylene carbonate and fluoroethylene carbonate. Additionally, the current approach is scalable to full Na- and Mg-ion cells by using t-Na5V(PO4)2F2 and MgMnSiO4 cathodes, respectively, reaching 250 and 110 W h kg-1 based on the anode mass. The simultaneous Mg (de)insertion from/into MgMnSiO4 and the adsorption/desorption of bistriflimide ions on the NGHSPC surface is responsible for capacity enhancement.

Efficient Removal of Nonylphenol Isomers from Water by Use of Organo-Hydrotalcites.

The presence of potent organic endocrine-disrupting chemicals (EDCs) in natural aquifers can have adverse impacts on public health and the environment. 4-nonylphenol, one such EDC, can be efficiently removed from water by adsorption onto a clayey material. In this work, we created an effective sorbent for this purpose by using co-precipitation and subsequent ion-exchange to intercalate the organic anion deoxycholate into a Mg/Al hydrotalcite. Intercalating deoxycholate ions increased the organophilicity of the hydrotalcite surface. The solid was used to adsorb 4-nonylphenol at different pollutant concentrations and temperatures. The adsorption process was subjected to a kinetic study. Based on the results, the EDC was adsorbed by chemisorption. In addition, based on the equilibrium isotherms used for the process, the Freundlich model was the most accurate in reproducing the adsorption of 4-nonylphenol onto deoxycholate-intercalated hydrotalcite.

Hydrogen Production through Glycerol Photoreforming on TiO2/Mesoporous Carbon: Influence of the Synthetic Method.

This article explores the effect of the synthetic method of titanium dioxide (TiO2)/C composites (physical mixture and the water-assisted/unassisted sol-gel method) on their photocatalytic activity for hydrogen production through glycerol photoreforming. The article demonstrates that, apart from a high surface area of carbon and the previous activation of its surface to favor titania incorporation, the appropriate control of titania formation is crucial. In this sense, even though the amount of incorporated titania was limited by the saturation of carbon surface groups (in our case, ca. 10 wt.% TiO2), the sol-gel process without water addition seemed to be the best method, ensuring the formation of small homogeneously-distributed anatase crystals on mesoporous carbon. In this way, a ca. 110-fold increase in catalyst activity compared to Evonik P25 (expressed as hydrogen micromole per grams of titania) was achieved.

A multi-analytical study of a wall painting in the Satyr domus in Córdoba, Spain.

In this work, we conducted a careful study of the mortar and paint in the Roman wall painting housed by the triclinium of the so-called Domus in the Road Safety Education Park of Córdoba, Spain. A combination of X-ray diffraction, Raman and X-ray fluorescence spectroscopies allowed the different substances used to obtain the pigments present in the painting to be identified. The painting was found to contain five different colours (red, yellow, blue, green and white) in various hues. The red pigment was obtained from hematite and the yellow pigment from goethite. The blue pigment, which was the least abundant, was prepared from Egyptian blue, and the green pigment from green earths. Finally, the white pigment came from lime. The binders used were identified by infrared spectroscopy and gas chromatography with mass spectrometry detection. The painting fragments studied contained vestiges of bee wax or its decomposition products, which suggests that the paint was applied encaustically.

Oleate Epoxidation in a Confined Matrix of Hydrotalcite.

Oleate ion was intercalated into a hydrotalcite obtained using a conventional precipitation method and an alternative, novel method involving microwave-assisted ion exchange. The latter method gave a more crystalline hydrotalcite with better textural properties than the former. The spacing between layers in the hydrotalcites was used to epoxidize the double bond in oleate ion. X-ray diffraction patterns revealed that the layered structure of the hydrotalcites was not altered by the reaction. The epoxidation of oleate ion with m-chloroperbenzoic acid (mCPBA) was monitored using Raman spectroscopy. The results of this work testify to the high potential of hydrotalcites as molecular reactors for reactions in confined spaces.

Identification of pigments in the Annunciation sculptural group (Cordoba, Spain) by micro-Raman spectroscopy.

A highly flexible method based on micro-Raman spectroscopy was used to examine pigment traces on an Annunciation sculpture group dating from the late Middle Ages. The group comprises a statue of the Archangel Gabriel and another of the Virgin Mary. Both are currently housed in the Archaeological Museum of Cordoba, southern Spain. Information about the pigment palette used by the artists of the time to decorate religious limestone sculptures was for the first time obtained. The pigments found included vermilion (HgS), hematite (α-Fe2O3), azurite [Cu3(CO3)2(OH)2], cerussite (PbCO3) and anatase (TiO2). None was directly applied to the sculptures; rather, the limestone was coated with a primer containing calcium carbonate (possibly chalk or half-chalk). The polychromy on both sculptures, which was originally applied in the XV century and seriously damaged in the XVIII, had been treated with an ochre-coloured priming layer of gypsum to make it more uniform and optically similar to the underlying stone.

Spectroscopic analysis of corrosion products in a bronze cauldron from the Late Iberian Iron Age.

Selected bronze fragments unearthed at Cerro de la Cruz (Almedinilla, southern Spain) were analyzed to determine the chemical composition of the corrosion products formed on their surface. The fragments came from a large bronze cauldron used in an Iberian village that was devastated in the mid II century BCE - possibly around 141 BCE. The fragments were analyzed by using various instrumental techniques including electron scanning microscopy coupled to energy dispersive X-ray spectroscopy (SEM-EDS), X-ray fluorescence (XRF) spectroscopy, and also by X-ray diffraction (XRD) and micro-Raman spectroscopy. Based on the results, being buried for a long time caused the main elements in the alloy to mineralize and form stratified layers consisting of various mineral phases including cuprite (Cu2O), malachite [Cu2CO3(OH)2] and cassiterite (Sn2O). The fragments also contained chloride and trihydroxychloride compounds such as nantokite (CuCl) and atacamite [Cu2Cl(OH)3], respectively, which make conservation of archaeological objects troublesome. These results testify to a strong interaction of the alloy elements with soil components. Also, the results obtained suggest a Type I of corrosion structure. Using the SEM-EDS, XRD and XRF and micro-Raman spectroscopies allowed corrosion products in the fragments to be successfully characterized in microchemical and structural.

Raman microspectroscopic analysis of decorative pigments from the Roman villa of El Ruedo (Almedinilla, Spain).

In this work, we analysed the preparatory layer and paintings in the hypocaustum of the Roman villa of El Ruedo (Almedinilla, southern Spain). The specimens studied were from the III and IV centuries. Raman microscopy was for the first time used here to examine Roman pictures in the south of the Iberian peninsula. The results obtained allowed us to establish the chemical nature of the different pigments used by the Roman artists. All were applied over a preparatory layer consisting of limewash. The different colours used (black, white, red, yellow, green and blue) were obtained by using carbon, calcite, gypsum, hematite, goethite, green earth and Egyptian blue. Some exhibited various hues that were obtained by mixing the previous compounds. Worth special note is the incipient presence of blue pigments, which were rarely used in Roman Hispania owing to their scarcity and high price.

Increased resistance to beta-lactams in a Klebsiella pneumoniae strain: role of a deletion downstream of the Pribnow box in the blaSHV-1 promoter.

Two hundred and five isolates of Klebsiella pneumoniae were collected from Nantes University Hospital in 2002. A new 30bp deletion was detected downstream of the -10 box of the SHV-1 promoter in a clinical K. pneumoniae isolate with a high amoxicillin/clavulanic acid minimum inhibitory concentration. Reverse transcription polymerase chain reaction revealed increased transcription of bla(SHV-1) mRNA. All conjugation mating assays failed. This new promoter was cloned upstream of the cat gene of the reporter plasmid pKK232-8 and compared with previously described bla(SHV-1) promoters. The deletion induced a 15-fold increase in promoter strength compared with the usual weak promoter. This study reports a new genetic event that increases bla(SHV-1) chromosomal gene expression, which may be of clinical relevance when associated with porin deficiency.